Cleaning Intake Filters
The filters should be cleaned or replaced when they become dirty. The frequency will depend on how often and in
what conditions the luminaire is used.
Parts:
10.9816.0788
1 EA
10.9816.0789
1 EA
Tools & Supplies:
#2 Phillips screwdriver
and/or
Compressed air
To clean or replace filters:
WARNING:
Remove power from luminaire before performing any maintenance procedures.
Step 1. Remove power from luminaire.
Step 2. Remove pan-side yoke leg cover. (Refer to
Step 3. Remove foam filter and electrostatic filter as one unit from yoke leg (Figure 3-6).
Step 4. Clean filters with compressed air and/or by washing with water. Replace as necessary.
Step 5. Re-install components.
Note: If the filters do not get clean after multiple attempts, they should be replaced.
®
28
BEST BOY 4000
SPOT LUMINAIRE FIELD SERVICE MANUAL
YOKE FAN, AIR FILTER, FOAM
YOKE FAN, AIR FILTER, ELECTROSTATIC
water
Figure 3-6: Removing Air Filters
"Removing Yoke Leg Covers"
Foam Filter
Electrostatic
Filter
on page 26.)