Replacement Of The Thermostat To Reduce The Coffee Dispensing Group Temperature; Unction / Use And Programming - Saeco SE Compact Instruction And Maintenance Manual

English
6.5 Replacement of the thermostat to
reduce the coffee dispensing
group temperature.
Remove cup heating bowl (1). Disconnect group thermostat
(2) (Code WGADM1561 – T 103°C) and replace it with
the lower temperature thermostat (Code WGADM1736 –
T 98°C), included in the machine equipment.
fig. 9
7- .UNCTION / USE AND
PROGRAMMING
INTRODUCTION
The programming software permits the checking of the
following operations:
- handling of 1 - 2 coffee units
- control of four different coffee doses for each unit
- simultaneous function of both coffee and tea units
- volumetric check on coffee measures
- simulated measure programming
- filling level check and control
- system supervision through alarms
- continuos, delivery time-out and further functions
- serial connection with accounting devices
12
Keyboard symbols:
T1 – single espresso coffee
T2 – double espresso coffee
T3 – single long coffee
T4 – double long coffee
T5 – Programming/continuos