Figure 72 Displaying Log Parameters Example - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 72 Displaying Log Parameters Example

4 Use
sys logs category
record.
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to
record only alerts for that category, and 3 to record both logs and alerts for that category.
Not every parameter is available with every category.
5 Use the
this in order to record logs).
Displaying Logs
• Use the
• Use the
the log categories.
• Use the
individual ZyWALL log category.
• Use the
692
ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/
1:show debug type]
followed by a log category and a parameter to decide what to
command to store the settings in the ZyWALL (you must do
sys logs save
command to show all of the logs in the ZyWALL's log.
sys logs display
sys logs category display
sys logs display [log category]
command to erase all of the ZyWALL's logs.
sys logs clear
command to show the log settings for all of
command to show the logs in an
Appendix Q Log Descriptions