No Access 802.1X + No Wep; Configuring Mac Filter; Figure 43 Mac Address Filter - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

6.11.8 No Access 802.1x + No WEP

Select No Access 802.1x + No WEP to deny all wireless stations access to your wired
network and block all wireless stations from communicating with the ZyWALL.

6.12 Configuring MAC Filter

The MAC filter screen allows you to configure the ZyWALL to give exclusive access to
specific devices (Allow Association) or exclude specific devices from accessing the
ZyWALL (Deny Association). Every Ethernet device has a unique MAC (Media Access
Control) address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC
addresses of the devices to configure this screen.
To change your ZyWALL's MAC filter settings, click WIRELESS LAN, then the MAC
Filter tab. The screen appears as shown.

Figure 43 MAC Address Filter

124 Chapter 6 Wireless LAN