Figure 469 Displaying Log Categories Example; Figure 470 Displaying Log Parameters Example - ZyXEL Communications ZYWALL 2 WG User Manual

Appendix I Command Interpreter
Configuring What You Want the ZyWALL to Log
1 Use the
configure which logs the ZyWALL is to record.
2 Use

Figure 469 Displaying Log Categories Example

3 Use
are available for the category.

Figure 470 Displaying Log Parameters Example

4 Use
record.
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to
record only alerts for that category, and 3 to record both logs and alerts for that category.
Not every parameter is available with every category.
5 Use the
this in order to record logs).
Displaying Logs
• Use the
• Use the
log categories.
• Use the
individual ZyWALL log category.
• Use the
702
command to load the log setting buffer that allows you to
sys logs load
to view a list of the log categories.
sys logs category
ras> sys logs category
8021x
error
javablocked
cdr
tcpreset
urlforward
sys logs category
ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/
1:show debug type]
followed by a log category and a parameter to decide what to
sys logs category
command to store the settings in the ZyWALL (you must do
sys logs save
sys logs display
sys logs category display
sys logs display [log category]
command to erase all of the ZyWALL's logs.
sys logs clear
access attack
icmp ike
mten packetfilter
pki tls
traffic upnp
wireless
followed by a log category to display the parameters that
command to show all of the logs in the ZyWALL's log.
command to show the log settings for all of the
command to show the logs in an
display
ipsec
ppp
remote
urlblocked
ZyWALL 2WG User's Guide