Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperWorkstation 7036A-T.
Installation and maintenance shall be performed by experienced technicians only.
The SuperWorkstation 7036A-T is a dual processor system based on the SC733TQ-
665B mid-tower chassis and the Super X8DAL-i serverboard. Please refer to our
web site for an up-to-date list of supported processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
system and describes the main features of the Super X8DAL-i serverboard and
the SC733TQ-665B chassis.
Chapter 2: Installation
This chapter describes the steps necessary to setup the system. If your workstation
was ordered without the processor and memory components, this chapter will refer
you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperWorkstation 7036A-T.
Preface
iii
Preface
Advertisement
Table of Contents
