Page 1
® AIR CLEANERS MODEL SC 150 OWNER’S MANUAL CAUTION READ COMPLETE INSTRUCTIONS BEFORE OPERATING. PLEASE FILE FOR FUTURE REFERENCE.
Page 2
Looking inside the unit, remove the two (2) filter spring MODEL SC 150 SPECIFICATIONS retainers and pull out the foam prefilter, HEPA filter and Input Volts: 120 Volts, 60Hz charcoal/ purasorb filter. REMOVE THE PLASTIC WRAP 220 Volts, 50 Hz...
Page 3
SC150 INSTALLATION INSTRUCTIONS FOR VERTICAL NOTE: After some time,the flexible hose may not hold in a horizontal WALL MOUNT APPLICATIONS position. This can be fixed by simply twisting the hose counterclockwise thereby slightly reducing the hose diameter and This kit (Part No. 33076-01) contains: tightening the segmented joints.
Page 4
3.After location of the wall mount has been decided, install the CAUTION: WHEN MOUNTING WALL BRACKETS TO SC150 wall bracket supplied in this kit by mounting to the WALLBOARD, BE CERTAIN THAT SCREWS ARE wall using the 3 #10 hex screws provided. Note that SECURED TO WALL BOARD VIA WALL JOISTS, OR BY source capture arm is 34”...
Need help?
Do you have a question about the SC 150 and is the answer not in the manual?
Questions and answers