Table of Contents
Advertisement
7.5.7. View EDID header
Description: EDID_HEADER consists of 3 fields:
PNPID code
Preferred resolution
Name
Command {wh<loc>}
Response (EH#<loc>●
Explanation: Shows the EDID from memory location 104.
7.5.8. Download EDID content from the router
Description: EDID hex bytes can be read directly. The router will issue the whole
content of the EDID present on memory location <loc> (256 bytes).
Command {we<loc>}
Response (EB#<loc>●<B1>
Legend: <B1>..<B256> are space separated hex characters represented in ASCII
format.
Explanation: Full EDID from memory location 1 is downloaded.
7.5.9. Upload EDID content to the router
Description: EDID hex bytes can be written directly to the user programmable
memory locations (locations #51...#100).
Sequence:
Step 1. Prepare the router to accept EDID bytes to the specified location <loc> with
Step 2. Router responds that it is ready to accept EDID bytes with (E_L_S)CrLf
Step 3. Send 1 block of EDID (1 block consist of 8 bytes of hex data represented in
Step 4. The router acknowledges with response (EL#<num>)
Step 5. Repeat steps 3 and 4 to send the remaining 31 blocks of EDID (32
Step 6. After the last acknowledge, the router indicates that the EDID status
Section 7. Programmer's reference
The three letter abbreviation of the manufacturer
The resolution and refresh rate stored in the preferred
detailed timing block.
The name of display device stored in product descriptor.
Format
<EDID_HEADER>)CrLf
Format
●<B2>●..●<B256>)CrLf
command {WL#<loc>}
ASCII format) with command {WB#<num>●<B1>●<B2>●<B3>●<B4>
●<B5>●<B6>●<B7>●<B8>}
altogether)
changed by sending (E_S_C) CrLf
MX16x16DVI-Slim
User's Manual Rev. 1.0
Example
→ {wh104}
← (EH#104 NEC 1280x1024@60
LCD1970NXp)
Example
→ {we1>}
← (EB#1 00 FF FF FF FF FF FF 00 32
F2 00 00 00 .. .. .. 00 92) CrLf
Page 61 / 78
Advertisement
Table of Contents
