2.4. Electrical connections
2.4.1. Power connector
Neutrik Speakon locking connector is used to connect the power supply unit with
the router. The connector is made with custom pin assignment. Using the DC
power cable provided with the router is always recommended.
Warning
Never use the cable of other electronic equipment that seems to be compatible
!
with this connector!
DC power connector pin assignment
If a custom length DC power cable has to be made, follow the below specification.
Recommended cable: 4 wire, each 4 mm
Current:
Cable connector type: Neutrik Speakon NL4FC
Chassis connector type: Neutrik Speakon NL4MP
Page 16 / 78
Maximum length 1.5 meters (5 feet)
10 A @ 3.3 V DC
10 A @ 5 V DC
pin 1+
GND
pin 1-
+3.3V
Figure 2-4. DC power cable connector pin assignments
pin 1+
GND
pin 2-
+ 5.0V
Figure 2-5 DC chassis connector pin assignments
2
(4×AWG12)
pin 2-
+ 5.0V
pin 2+
GND
pin 1-
+ 3.3V
pin 2+
GND
Section 2. Controls and connections