Table of Contents
Advertisement
Synchronizing EDID lists
By clicking "Synchronize EDID List" button the Lightware Matrix Controller software
rereads all EDID information from the connected matrix switcher. During normal
operation it is not necessary to use this function because the matrix switcher
always reports every status change automatically.
Info:
There is always a small delay in responses. So if a new monitor is connected to the
output its new EDID is not shown immediately but in 2-3 seconds!
Info:
As the matrix switcher reports status change nothing will happen if you select the
same EDID to a given input or connect the same display device to a given output!
4.4.2. Advanced EDID Editor
This powerful tool is essential for AV professionals. The Lightware Advanced EDID
Editor is integrated into the Lightware Matrix Controller software, and it makes
possible to manage every setting in the EDID on an intuitive user interface. The
editor can read and write all descriptors, which are defined in the standards,
including the additional CEA extensions.
Any EDID from the router‟s memory or a saved EDID file can be loaded in the
editor. The software resolves the raw EDID, and displays it as readable information
to the user. All descriptors can be edited, and saved in an EDID file, or uploaded to
the router‟s memory.
By clicking on the green arrow, the editor area rolls down.
When the user enters the menu for the first time, an empty EDID is loaded into the
editor‟s memory.
All EDID in the router‟s memory can be edited in the following way:
Step 1. Right click on the desired EDID to be loaded to the EDID Editor.
Step 2. In the pop-up menu, click on Edit EDID. The editor area automatically rolls
For further information, see the user‟s manual of Advanced EDID Editor.
4.4.3. Easy EDID Creator
Since the above mentioned advanced editor needs more complex knowledge
about EDID, Lightware introduced a wizard like interface for fast and easy EDID
creation. With Lightware Easy EDID Creator it is possible to create custom EDIDs
in four simple steps.
By clicking on the wizard icon, the Easy EDID Creator opens in a new window.
For further information, see the user‟s manual of Easy EDID Creator.
Page 36 / 78
down, and the EDID is loaded into the editor area.
Section 4. Software control – Using Lightware Matrix Controller
Advertisement
Table of Contents
