Software Control - Using Lightware Matrix Controller; Installing The Matrix Controller Software - Lightware MX16x16DVI-Slim User Manual

4. Software control – Using Lightware Matrix Controller
The matrix router unit can be controlled using Lightware Matrix Controller from a
Windows PC or Laptop through RS-232 or Ethernet port.

4.1. Installing the Matrix Controller software

Step 1. Run Installer_LW_matrix_controller_v3_2_0.exe
Step 2. Select destination folder and click Install (Using the default path is highly
Step 3. If you want to create desktop icon click Yes in the next pop-up window:
Step 4. After finishing the installation the following message appears:
Step 5. To run Lightware matrix control software find the shortcut icon in
Uninstalling
To uninstall the control software double click on: Start menu  Programs 
Lightware  Uninstall_LW_matrix_controller_vXXX.exe
Section 4. Software control – Using Lightware Matrix Controller
recommended)
Start menu  Programs  Lightware  LW_matrix_controller_vXXX or on
the desktop, and double click:
MX16x16DVI-Slim
User's Manual Rev. 1.0
Page 27 / 78