Glass Canopy; Light Bulbs; Stainless Steel Hood Surfaces - Monogram ZV900 Owner's Manual

Glass
Clean with a damp, soapy cloth and dry with a
clean cloth. A glass cleaner may also be used.
canopy
Stainless
Do not use a steel wool pad; it will scratch
the surface.
steel hood
surfaces
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.

Light bulbs

To change the light bulbs:
1. Remove the inner lamp lens cover by inserting a
2. Grasp the bulb and pull it straight out.
3. Replace with the same wattage, type and size
4. Replace inner cover by inserting the three
8
small flat blade screwdriver into each of the three
slots and gently prying it free.
NOTE: Do not remove the outer trim ring (lamp
assembly).
bulb. Wear Gloves. Do not touch bulb with your
bare fingers.
These 12 volt, 20 watt halogen bulbs with a G4
base are available at specialty lighting stores and
home building centers.
NOTE: If WRONG WATT BULB appears in the
display, the wrong kind of replacement bulb has
been used. Replace with the same wattage, type
and size bulb as the one removed.
retaining tabs into the three slots and pressing
them firmly in place.
Care and Cleaning
Glass Canopy Hood
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, please call our toll-free
number:
National Parts Center
monogram.com
Use a small flat blade screwdriver to
remove the inner lamp lens cover.
Bulb
NOTE: Make sure the tabs are inserted into the slots.
800.626.2002
Outer trim ring
(lamp assembly)
Do not remove
Removable inner
lamp lens cover