Editing The Connected Ip Cameras And Configuring Customized Protocols - HIKVISION DVR User Manual

User Manual of Digital Video Recorder
2.3.2 Editing the Connected IP Cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Channel Port: If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the dropdown list.
2. Click OK to save the settings and exit the editing interface.
To edit advanced parameters:
Steps:
1. Drag the horizontal scroll bar to the right side and click the
Figure 2. 16 Selecting Multiple Channels
Figure 2. 17 Edit the Parameters
40
icon.