Using The Wizard For Basic Configuration - HIKVISION DVR User Manual

User Manual of Digital Video Recorder

2.2 Using the Wizard for Basic Configuration

By default, the Setup Wizard will start once the DVR has loaded, as shown in Figure 2. 3.
Steps:
1. Please select the system language in the drop-down list on your demand.
2. The Setup Wizard can walk you through some important settings of the DVR. If you do not want to use
the Setup Wizard at this time, click the Cancel button. You can also choose to use the Setup Wizard next
time by leaving the "Start wizard when device starts?" checkbox in checked status.
3. Click Next button on the Wizard window to enter the Login window, as shown in Figure 2. 5.
Figure 2. 3 Language Selection
Figure 2. 4 Start Wizard Interface
33