Using Input/Output Terminals - Samsung svr-3200 Install Manual

Install Manual
Schedule Setup
Select the "Schedule & Event" option, and set the Day & Time options.
How to check the record status
If the record setup is configured correctly, [REC LED] on the front panel will
light up RED. Also, record status [S] will be displayed on the video screen.
[S] indicates scheduled recording.
3.3

Using input/output terminals

3.3.1 Handling cable ends
The following details how to handle cables for the terminal block. Please note that different
gauges of wire are needed for stranded wire and solid wire.
- Stranded wire: Strip 8 ~ 10㎜ of insulation off the end of the wire and solder it together. Use
AWG 22 ~ 26 wire.
- Solid wire: Strip 8 ~ 10㎜ of insulation off the end of the wire. Use AWG 20 ~ 26.
40