Getting To Know Your Cleaner; Assembling Your Cleaner; Using Your Cleaner - Hoover vacuum cleaner User Manual

GETTING TO kNOw yOUR ClEANER

A. Cleaner Main Body
B. Dust Container
C. Dust Container Handle
D. Dust Bin
E. On/Off Button
F. Cord Rewind Button
G. Dust Container Release Button
H. Dust Container Door Release Trigger
I. Multi-Cyclonic separation Unit
J. Multi-Cyclonic separation Unit Handle
K. Pre Motor Filter Pack
L. Parking slot
M. Handle
N. suction Regulator*
O. Telescopic Tube Adjuster
P. Telescopic Tube
Q. Carpet & Floor Nozzle(GP)**
Q1. Carpet Nozzle (CA)**
Q2. Hard Floor Nozzle (HF)**
R. Carpet Care Control selector**
s. Hose
T1. T. 3 In 1 Tool*
T1a. Dusting Brush
T1b. Crevice Tool
T1c. Furniture Nozzle
T2. Accessory set*
T2a. Dusting Brush
T2b. Crevice Tool
T2c. Furniture nozzle
T2d. Accessory holder
U. Parquet Caresse Nozzle*
V. Pet Hair Remover Mini Turbo Nozzle*
W. Allergen Remover Mini Turbo Nozzle*
X. Grand Turbo Nozzle*
Y. stair Cleaning stretch Hose*

ASSEmblING yOUR ClEANER

Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the two buttons on the hose end and pull. [2]
2. Connect the tube upper end to the hose handle and store the accessories on the handle. [3]
3. Connect the tube lower end to the carpet and floor nozzle, ensure it clips and locks
into position. [4]
*Certain Models Only ** Certain models only, nozzles may vary according to model
Connect the accessories to the holder and then fix the accessory set to the tube. [5]
4.

USING yOUR ClEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [6]
2. Adjust the telescopic tube to the desired height by moving the telescopic release
button up and raise or lower the handle to the most comfortable cleaning position. [7]
3. Carpet and Floor Nozzle** - select carpet care control** height by pressing the
pedal in the nozzle. [8]
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
4. switch the cleaner on by pressing the On/Off Button on the cleaner main body. [9]
5. Adjust the suction by moving the suction regulator to the desired level.* [10]
6. switch off at the end of use by pressing the On/Off Button. Unplug and press the
cord rewind button to wind the power cord back into the cleaner. [11]
7. To store your cleaner adjust telescopic tube to the lowest height setting and park the
nozzle in the parking slot on the cleaner main body. [12]
ACCESSORIES ANd NOzzlES
To obtain the best performance and energy efficiency
rect nozzles are used for the main cleaning operations. These nozzles are indicated in
the diagrams by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as re-
quired by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
#1
NOTE: Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency
in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
All accessories can be fitted to the end of the hose handle or to the end of the telescopic tube.
2
#1
it is recommended that the cor-