Control Panel Resistor - KitchenAid KAC-24 Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
1. Disconnect the electrical power to the
microwave oven.
2. Remove the control panel from the micro-
wave oven (see page 2-3 for the proce-
dure).
3. Set the ohmmeter to the R x 1K scale.
4. Touch the ohmmeter leads to the resistor
leads. The meter should indicate approxi-
mately 1200 Ω.

CONTROL PANEL RESISTOR

Measure 1200 Ω
Resistor Leads
3-10
Connector
P5