Removing The Convection Thermal Fuse, Convection Element, And Convection Fan Motor - KitchenAid KAC-24 Technical Education

REMOVING THE CONVECTION THERMAL FUSE,
CONVECTION ELEMENT, AND CONVECTION FAN MOTOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Disconnect the electrical power to the
microwave oven.
2. Remove the microwave oven from the
oven cabinet (see pages 2-8 & 2-9 for the
procedure).
3. Position the microwave oven with the back
facing you.
4. To remove the convection thermal fuse:
a) Disconnect the wires from the termi-
nals.
b) Remove the two T-10 torx screws.
Screw
Convection
Thermal
Fuse
Screw
5. To remove the convection element:
a) Disconnect the wires from the termi-
nals.
b) Remove the four T-10 torx screws from
the mounting cover.
Screw (1 of 4)
Back Of Oven
c) Turn the cover around so that the con-
vection element faces you and remove
the three T-10 torx screws from the
element.
Screw
Screw
2-16
Convection
Element Wires
Mounting Cover
Screw
Convection Element