Control Panel; Start Protection/Key Lock; Doneness (Auto Functions Only) - KitchenAid Instructions for use Instructions For Use Manual

Control panel

A. Multifunction knob
B. Stop button
C. Back button
D. Display

Start protection/key lock

T
HIS AUTOMATIC SAFETY FUNCTION IS ACTIVATED
the oven has returned to "stand
ONE MINUTE AFTER
by mode". (The oven is in "stand by" when the 24-
hour clock is displayed or if the clock has not been
set, when the display is blank).

Doneness (Auto functions only)

D
ONENESS IS AVAILABLE
functions. You have the possibility to personally
control the end result through the Adjust doneness
feature. This feature enables you to achieve higher
or lower end temperature compared
to the default standard setting.
W one of these functions the oven
HEN USING
chooses the default standard setting. This setting
normally gives you the best result. But if the food
you heated became too warm to eat at once, you
can easily adjust this before you use that function
the next time.
in most of the auto
E. OK button
F. Start button
G. Adjust knob (+/-)
T
HE DOOR MUST BE OPENED AND
e.g. putting food into it,
CLOSED
before the safety lock is released.
Else the display will show "DOOR".
L
EVEL
H +2
IGH
H +1
IGH
M 0
ED
L -1
OW
L -2
OW
N :
OTE
T can only be set or altered during
HE DONENESS
the first 20 seconds of operation.
T
HIS IS DONE BY SELECTING A DONENESS LEVEL
with the +/- knob right after you have pressed the
Start button.
12
DONENESS
E
FFECT
Y
IELDS HIGHEST END
TEMPERATURE
Y
IELDS HIGHER END
TEMPERATURE
D
EFAULT STANDARD
SETTING
Y
IELDS LOWER END
TEMPERATURE
Y
IELDS LOWEST END
TEMPERATURE