Group 1 >>>> Interfaces Selection, Computer Type, Default - ID Tech EconoScan Manual

-- GROUP 1 --
COMPUTER TYPE, DEFAULT.
DEFAULT
. C004$
PC- AT
. C006$
MAC ADB
SYMPTOMS
Scanners perform well as usual, but
there is no any output show on the
Computer's monitor while the
scanner is reading a bar code.
Cautions: Please set to right Computer Type when you change a terminal
* If Notebook is On, scanner operate with No external keyboard
. C001$
KEYBOARD& USB
. C003$
WAND
SYMPTOMS
The scanner will sound a beep then
the LED light turns off, no wonder how
many time you push the switch button,
the scanner still cannot work properly,
LED light will not light, seems that it
has been seriously damaged.
*Most scanners are designed with the flexibility for easy Interfaces
changing. You can change an interface of a scanner from one to
another just simply change a cable. Please do not forget to set the
scanner to the interfaces that matched to the cable..
.
INTERFACES SELECTION,
9
. A001$
COMPUTER TYPE
. C005$
PC-XT
. C007$
NOTEBOOK*
SOLUTION
1.Unplugged the cable from
the computer,
2.Replug in the cable,set the
scanner to the exact Type of
Computer immediately.
INTERFACES SELECTIO
. C008$
RS485
. C002$
RS232
SOLUTION
1.Please Unplugged the cable
from the computer.
2.Replug in the cable, and set
the scanner to the right
interfaces with the manual
immediately.