Related Manuals for ID Tech Econoscan II
Summary of Contents for ID Tech Econoscan II
- Page 1 Programming Your ID Tech Econoscan II 1-866-468-5767 International Point of Sale 201-928-0222 555 Cedar Lane Teaneck, New Jersey 07666...
- Page 2 This document will show you how to program your ID Tech Econoscan II scanner to read barcodes the way they are formatted in your Corner Store POS database. Most of your products have UPC-A barcodes that have 12 digits with 10 digits in the middle, one in the front and one at the end.
- Page 3 All of these codes and more are found in the ID Tech Econoscan II user manual found here: http://www.idtechproducts.com/index.php?option=com_docman&task=cat_view&gid=435&It emid=83 Reset to factory defaults (usually not necessary) Before you program any configuration to your scanner you must first scan a “Start Configuration”...
- Page 4 UPC-A How to make it only output the 10 digits in the middle for a 12 digits UPC-A barcode 1. Scan Start of configuration 4. Validate action 2. Remove the last digit iii. 3. Remove the first digit 5. Scan End of Configuration 1-866-468-5767 International Point of Sale 201-928-0222...
- Page 5 UPC-E How to make it output the middle 6 digits for an 8 digits UPC-E barcode 1. Scan Start of configuration 4. Validate action 2. Remove the last digit iii. 3. Remove the first digit 5. Scan End of Configuration 1-866-468-5767 International Point of Sale 201-928-0222...