Remove The Interposer Board - HP ProLiant SL250s Gen8 User Manual

Right node
o
Install the server into the chassis
2.
Connect all peripheral cables to the server.
3.
Power up the server (on page 15).
4.

Remove the interposer board

Power down the server (on page 15).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 15).
3.
Remove the front GPU cage (on page 16).
4.
Remove the interposer board.
5.
("Installing the server into the chassis" on page 31).
Operations 18