Connecting The Suv Cable - HP ProLiant SL250s Gen8 User Manual

—
Tesla K20/K20X GPUs
Install the GPU cage.
11.
Install the interposer board (on page 19).
12.
Install the front GPU cage (on page 17).
13.
Install the server into the chassis
14.
Connect all peripheral cables to the server.
15.
Power up the server (on page 15).
16.

Connecting the SUV cable

CAUTION:
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Item Connector
SUV port
1
SUV connector
2
("Installing the server into the
Before disconnecting the SUV cable from the connector, always squeeze the release
Description
SUV port on the server front panel
For connecting to the SUV connector on the
chassis" on page 31).
Hardware options installation 67