Installing A Quick-Release Drive - HP ProLiant SL250s Gen8 User Manual

Right node
o
Install the front GPU bracket (on page 20).
14.
Install the interposer board (on page 19).
15.
Install the front GPU cage (on page 17).
16.
Install the server into the chassis
17.
Connect all peripheral cables to the server.
18.
Power up the server (on page 15).
19.

Installing a quick-release drive

Power down the server (on page 15).
1.
Remove the server from the chassis (on page 15).
2.
Install a SFF quick-release drive cage
3.
If installing a drive in the front GPU cage, remove the front GPU cage (on page 16).
4.
("Installing the server into the
("Installing SFF quick-release drive
chassis" on page 31).
cages" on page 45).
Hardware options installation 50