Retaining The Recovery Key/Password - HP ProLiant SL250s Gen8 User Manual

Install the TPM board. Press down on the connector to seat the board
8.
page 9).
Install the TPM security rivet by pressing the rivet firmly into the system board.
9.
Install the FlexibleLOM riser cage (on page 25).
10.
Install the SFF hot-plug drive cage
11.
Install the front GPU bracket (on page 20).
12.
Install the interposer board (on page 19).
13.
Install the front GPU cage (on page 17).
14.
Slide the server into the rack.
15.
Power up the server (on page 15).
16.

Retaining the recovery key/password

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
("Installing the SFF hot-plug drive
("System board components" on
cage" on page 23).
Hardware options installation 72