Neckrest - Invacare Rea Azalea Manual

3.
E
4.
1.
B
A
2.
C
D
24
D
NECK REST
3. The sidewise adjustment is made by loosening
screw (E). Adjust and re-tighten.
4. The angle of the wings is adjusted by loosening
screws (D). Adjust and re-tighten.
1. To adjust the height of the neck rest, first loosen
the screw (B) in the stop block, then loosen the
handwheel (A). Adjust the neck rest to the desired
position and re-tighten the handwheel (A).
Now slide the stop block down to the top of the
neck rest attachment and tighten the screw (B).
It is now posible to remove the neck rest and
reinsert it again in the desired position without
further adjustments.
2. The angle and depth is adjusted by the two
screws (C) and the handle (D). Loose them and
adjust.
Rea ® Azalea