Table of Contents
Advertisement
T-17SXLG
StarBoard
2.2 Using the Stylus Pen
This section describes how to use the StarBoard stylus pen.
2.2.1 How to Use the Stylus Pen
The stylus pen has a power switch. Battery life can be pronged by switching the power
switch OFF when not in use. To draw characters and figures using the stylus pen, set the
power switch of the stylus pen to the ON position.
ON/OFF switch
2.2.2 Basic Stylus Pen Operations
The stylus pen can be used in the same way as a mouse. Under the stylus pen's default
settings, the pen tip button is set to correspond to the left mouse button for Windows, to
the primary mouse button for Mac. When Windows or Mac OS is open, the pen tip button
may be used to perform the following mouse actions. The following xxxx/xxxx
description is for functions and operations in a Windows environment or Mac
environment.
• Clicking / Primary mouse button clicking
Press the pen tip against the display with a suitable amount of force and then release it
quickly.
• Double-clicking / Primary mouse button double clicking
Press the pen tip against the display with a suitable amount of force and then release it,
two times in a row.
• Dragging / Dragging
Press the pen tip against the display with a suitable amount of force and then move the
pen while keeping it pressed against the display (without releasing it from the display).
The permitted stylus pen input angle range is 30° in any direction from a position where
the stylus pen is perpendicular to the display surface. Note that if the pen is tilted at an
angle greater than 30°, its coordinates may not be input correctly.
Push the switch
ON
OFF
2-3
Usage
English
Advertisement
Table of Contents
