Table of Contents
Advertisement
T-17SXLG
StarBoard
2. Usage Procedures
This section describes the basic procedures for using StarBoard. For information on using
advanced StarBoard features, see the StarBoard Software x.x. Installation Guide, or StarBoard
Software x.x Online Help.
2.1 Turning the StarBoard On
2.1.1 For Windows User
This section describes how to turn the StarBoard on for Windows user.
(1) Turn on the StarBoard power.
(2) Turn on the PC and allow Windows to start.
(3) The StarBoard Software starts automatically. (If the Startup checkbox was not
checked during the shortcut creation process when the software was installed, the
StarBoard Software will not start when Windows opens. In such cases, start the
StarBoard Software manually. For further details, see the StarBoard Software x.x
Installation Guide, or StarBoard Software x.x Online Help.)
Manual Startup
Either select Start → All Programs →
the StarBoard Software icon on the desktop. (The StarBoard Software icon is not
created on the desktop unless the Desktop checkbox is selected during the shortcut
creation process when the software is installed.)
Notice when displaying screens at SXGA resolution
Be sure to set the monitor refresh rate to 60 Hz if displaying the StarBoard at SXGA
resolution (1280 1024). If used at a refresh rate other than 60 Hz, the pen may not
operate correctly due to noise from the LCD panel. (For details on how to make
settings, see your PC's manual and other documentation.)
Push the power button
StarBoard Software, or double-click
2-1
Usage
English
Advertisement
Table of Contents
