Hitachi StarBoard T-17SXLG User Manual page 13

T-17SXLG
StarBoard
1.3.2 Front Switch Panel
(4)
(1) Power button
This button turns the StarBoard LCD
monitor ON/OFF
(2) Power indicator
This indicator turns green when
power is supplied normally to the
StarBoard and an image signal is
detected. It turns red when no image
signal is output from the PC, or
when power saving mode is on.
(3) AUTO/SELECT button
This button is used to automatically
adjust the screen display and select
OSD menu options.
For details on using the OSD menu, see "2.3 Using the OSD Menu" on page 2-6 of this
User's Guide.
(6)
(3)
1-4
(5)
(1)
(4) Menu button
This button is used to display the
OSD menu. Press it after making
menu selections to apply those.
(5) (+) button
This button is used to toggle muting
ON/OFF. It is also used to select
OSD menu options and change
settings.
(6) (–) button
Brightness can be adjusted by the (+)
and (-) buttons after pressing the (-)
button.
This button is also used to select
OSD menu options and change
setting values.
Introduction
(2)
English