NightWatcher 8 channel D1 Realtime DVR User Manual page 37

Channel Title: Click the channel name modify button and enter the channel name menu. Modify the
channel name. The 16 Chinese characters and 25 letters are supportive.
Time Display: means the selective state. Display the system data and time in the surveillance
window.
Channel Title: means the selective state. Display the system channel number in the surveillance
window.
Record Status: means the selective state. Display the system recording status in the surveillance
window.
Alarm Status: means the selective state. Display the system alarm status in the surveillance window.
Bit rate info: means the selective state. The ninth window displays the code stream information in the
nine-window preview status.
Transparency: Choose the background image transparency. The range is 128~255.
Resolution: set display resolution.
Channel: Choose the set code output channel number.
Region Cover: that means the selective state. Click the cover area button and enter the
corresponding channel window. You can cover the arbitrary using mouse. (Black region is for output)
Time display and Channel display
PTZ Config includes PTZ device & RS485 device.
Parity: Include odd check, even check, sign check, blank check. Default: void.
Protocol: Choose protocol of related brand model(Example: DaHua)；
Address: Set related address, default is 1.
Baud rate: choose bard rate of related device, default is: 115200.
Data bits: Include 5-8 options. Default: 8.
36
System Setup
PTZ Config Setup
◆ ◆ ◆ ◆
- PTZ Config
Channel: Choose the dome camera input
channel.
Protocol: Choose the corresponding dome
protocol. (PELCOD as an example)
Address: Set as the corresponding dome
address. Default: 1. （ Note： The address must
be consistent with the dome address.）
Baud rate: Choose the corresponding dome
baud rate length. You can control the PTZ
and vidicion. Default: 115200.
Data bits: Include 5-8 options. Default: 8.
Stop bits: Include 2 options. Default: 1.