Record Setup - NightWatcher 8 channel D1 Realtime DVR User Manual

Record Conf
■
Play Back
■
Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive
recording in the first startup. You can enter [main menu]> [recording function]> [recording setup] to set.
Note：There is at least one read-write
hard disk.（refer to chapter 4.5.1）
Channel: Choose the corresponding
channel number to set the channel.
Choose the all option to set the entire
channels.
SD card record: Device input with SD
card, enable SD card for record to start
recording
Redundancy: Choose the redundancy
function option to implement the file
double backup function. Double backup
is writing the video files in two hard disks.

Record Setup

SnapShot Conf
■
Backup
■
Record Conf
◆
19