NightWatcher 8 channel D1 Realtime DVR User Manual page 30

System Setup
– General, Encode
General Setup
◆
System time: Set the system data
and time.
Date format: Choose the data
format: YMD, MDY, DMY.
Date Separator:
Choose list
separator of the data format.
Time Format: Choose time format:
24-hour or 12-hour.
Language:
Arabic,Czech,English,Finnish,Gre
ek,Indonesian,Italian,,Japanese,P
ortuguese,Russian,Thai,T-Chinese
,S-Chinese,Turkish,Brazilian,Bulg
arian,Farsi,French,German,Hebre
w,Hungarian,Polish,Romanian,Spa
nish,Swedish,Vietnamese.
HDD full: Choose stop record: Stop recording when the hard disk is full. (Overwrite: Cover the earliest
recording files and continue recording when the hard disk is full)
DVR No.: Only when the address button in the remote controller and the corresponding DVR number
is matched, the remote operation is valid.
Video Standard: PAL or NTSC.
Auto Logout: Set the latency time in 0-60. 0 means no latency time.
DST: Choose the summer time option and pop the dialog box as followed.
Encode Setup
◆
Set the video/audio code parameter: video file, remote monitoring and so on. Set every main stream
parameter in the left part, and set the extra stream parameter in the right part.
Note: extra stream introduces video compression technique which was applying for multi-channel
playback simultaneously, Dial-up multi-channel real-time monitor under poor bandwidth, or mobile
monitor and so on.
29