NightWatcher 8 channel D1 Realtime DVR User Manual page 32

System Setup
- Net Service
TCP port: Default: 34567.
HTTP port: Default: 80.
HS Download
Transfer Policy: There are three strategies: self-adaption, image quality precedence and fluency
precedence. The code stream will adjust according to the setup. Self-adaption is the tradeoff between
the image quality precedence and fluency precedence. Fluency precedence and self-adaption are
valid only when the assistant code stream is turned on. Otherwise image quality precedence is valid.
Net Service Setup
◆ ◆ ◆ ◆
Choose the network service option and click the
set button to configure the advanced network
functions or double click the service button to
configure the parameters.
PPPoE Setup:
Input the user name and password that ISP
（Internet service provider）provides. After saving
it reboot up your system. Then the DVR will build
a network connection based on PPPoE. The IP
address will change into dynamic IP address after
above operation is well done.
Operation: After PPPoE dialing successfully look
up the IP address in the [IP address] and obtain
the current IP address. Then use this IP address to visit the DVR through user port.
NTP Setup:
The NTP server must be installed in the PC.
Host computer IP: Input the IP address installed
NTP server.
Port: Default: 123. You can set the port according
to NTP server.
31