Layout Of The Remote Control - NightWatcher 8 channel D1 Realtime DVR User Manual

Layout of the Remote Control

(4)
(1) (2)
1) MULT: Select the mult screens to view the image.
2) 0 ~ 9 (Numeric Buttons): Used to input numbers.
buttons in a similar manner to a television, and these will work during either live-viewing mode or
playback. Additionally, the numeric buttons will be used when inputting any numerical information –
most often, your password.
3) ESC: Cancel the settings or back to the up window.
4) SEARCH: To find hard disk video recorder on video date, provide diversified search terms.
5) -/-- : To select double figures orth three figures.
6, 7, 8 & 9) Arrow Buttons: Moves the cursor in the appropriate direction when navigating menus.
10) Menu: One of the primary controls for navigating through the menus. When in live-viewing mode,
it will enter the main menu. When pressed in the main menu, it will return the DVR to live-viewing
mode. Finally, when in a submenu, this button will return you to the main menu.
11) Play/Pause button: Play or pause the video during the playback state.
12) Play next file button: Play next video during the playback state.
13) Playback/ Pause button: Playback ot pause video during the playback state.
14) Play previous file button: Play previous video during the playback state.
15) Fast-Forward: During playback, this will incre ase the speed of playback. Press multiple times to
increase the speed of playback further.
16) Record: Press to immediately start recording. This acts as a manual override to the schedule and
motion recording modes. For a channel to be recorded in this mode (or any other) it must listed as
'active' in the Camera Setup and Record Setup menus.
17) ADD: Input the number of the DVR to control it.
18) FN: Assistant function that you can find same help when operation.
10
(5) (6) (10) (7) (8) (12) (14)
(3) (9)
(16) (18)
(11) (13) (15) (17)
1 ~ 9 can be used as quick channel changing