NightWatcher 8 channel D1 Realtime DVR User Manual page 31

Channel: Choose the channel number.
Compression: Standard H.264 main
profile.
Resolution:
Resolution
HD1/CIF / QCIF.
Frame Rate: P:1 frame/s~25 frame/s;
N: 1 frame/s~30 frame/s
Bit Rate Type: You can choose limited
code stream or variable code stream.
When you choose the variable code
stream there are six image quality
options.
Bit Rate: Set the code stream value to
modify the image quality. The larger code stream value the better image quality.
D1(1000~1500 kbps)
CIF（384~1500 kbps）
QCIF (64~512 kbps)
Video/Audio: When the icons are all in reverse displayed, the video file is video and audio multiplex
stream.
Extra stream Settings
Extra stream: is used for client side monitoring & mobile monitoring.
Channel title: select channel title and then to choose whether need enable video & audio. The
resolution, frame rate, bit rate type settings is the same as main stream.
Net Card: You can choose cable network
card or wireless network card.
DHCP Enable:
Obtain
automatically (not suggested)
(Note: DHCP server is preinstalled)
IP address: Set the IP address. Default:
192.168.1.10.
Subnet mask: Set the subnet mask code.
Default: 255.255.255.0.
Gateway: Set the default gateway. Default:
192.168.1.1.
DNS setup: Domain Name Server. It
translates the domain name into IP address. The IP address is offered by network provider. The
address must be set and reboot then it works.
30
System Setup
type: D1/
Network Setup
◆ ◆ ◆ ◆
IP address
- Network