NightWatcher 8 channel D1 Realtime DVR User Manual page 36

System Setup
- Net Service, GUI Display
UPNP
UPNP protocol can auto port forwarding on
router, make sure UPNP is running on router
before use it.
Enable: Choose Enable to make sure all
UPNP settings available
HTTP: Route will automatically distribute
HTTP port for the device, when IE viewing, it
needs this port (Such as: 60.12.9.26:66)
TCP: Router will automatically distribute TCP
port for the device, when monitoring via CMS,
it need this port.
Mobile Port: Router will automatically
distribute Mobile Port for the device, when
mobile monitor, it needs this port.
WIFI Setup
Access camera through wireless network to
connect with the DVR.
Search: Search SSID of wireless LAN
Enable: Select it to enable the function
SSID: SSID name
Password: password of WIFI
IP Address: IP address of WIFI
Subnet Mask: Subnet mask of WIFI
Gateway: Gateway of WIFI
GUI Display Setup
◆ ◆ ◆ ◆
Configure the video output parameters
including the front output mode and code
output mode.
Front output： ： ： ： In the local preview mode
include: channel title, time display, channel
title, record status, alarm status, bit rate
info, transparency and region cover.
Code output： ： ： ： In the network surveillance
and video file mode include: channel title,
time display, channel title, record status,
alarm status, bit rate info, transparency
and region cover.
35