Internet Setup - Nokia 9300i User Manual

To send a service request to your service provider,
select Extras Service command
>
request, and press Send.

Internet setup

Go to Desk Tools Control
> >
Connections Internet setup.
>
To connect to the Internet, you need an Internet access
point.
For connecting to the Internet over GPRS, the device has
predefined, default Internet access point settings. You can
create new Internet access points yourself, or you may
receive your Internet access point settings in a message
from your service provider. This might reduce the number
of settings you need to enter yourself, or eliminate the
need altogether.
The exact values for the settings are usually provided by
your service provider. Follow the instructions given to you
by your service provider very carefully.
Tip: You may need to set up several Internet
access points, depending on the sites you want
to access. For example, browsing the Web may
require one setup, and accessing your company
intranet may require another connection.
Setting up an Internet access point
1. Select Connections Internet
>
2. Press New. You can use an existing Internet access
point as a basis for the new one: after you have
editor, type the service
panel, and select
setup.
pressed New, press Yes. Select the access point from
the list, and press OK.
3. Define the settings.
• Internet settings name
name for the connection.
• Internet settings type
type. Depending on which connection you select,
only certain settings will be available during the
setup process.
• Network ID — Select the network ID according to
the destination network you want to access with
the Internet access point. You can rename, and
create new network IDs. Using the correct network
ID ensures that the data traffic is routed directly to
the desired destination network. Especially VPN
(virtual private network) software may restrict
data traffic for a certain destination network.
Network ID can be used to filter Internet access
points when establishing an Internet connection.
• GPRS access point name
are not using a default Internet access point, define
a name for the access point. You can obtain the
name from your network operator or service
provider.
• Telephone number (for GSM data only) — Type the
modem telephone number of the Internet access
point.
• Password prompt — Change this to
write a new password every time you log on to a
server, or if you do not want to save your password
to the device.
• User name — Type a user name if required by the
service provider. The user name may be needed to
make a data connection, and is usually provided by
— Enter a descriptive
— Select the connection
(for GPRS only) — If you
Yes if you must
89