Cover Phone; Making A Call - Nokia 9300i User Manual

Cover phone

With the cover phone, you can, for example, make and
receive calls, and change profiles. Most of these features
are also available in the communicator interface.
Cover phone display, standby mode
For more advanced tasks, use the communicator interface
which you can access by opening the cover. If you open
the cover during a call, the loudspeaker is activated. You
can also use the applications during a call.

Making a call

To make and receive calls, the cover phone must be
switched on, the device must have a valid SIM card
installed, and you must be located in a service area of the
cellular network.
A GPRS connection is put on hold during voice calls.
To make a call, key in the phone number, including the
area code. If you key in an incorrect character, press Clear.
Tip: For international calls, press
the + character that replaces the international
22
access code, and key in the country code, area
code (omit the leading 0, if necessary), and phone
number.
To call the number, press the Call key. To end the call or
cancel the call attempt, press the End key.
Tip: To adjust the volume during a call, press the
scroll key right to increase or left to decrease the
volume.
To make a call using the saved contacts, scroll down in
standby mode. Key in the first letters of the saved name.
Scroll to the name, and press the Call key.
Tip: You can save new contacts in the
menu in the phone or in the
dialog in the communicator interface.
To call a recently dialed number, in standby mode, press
the Call key to view up to 20 numbers that you have last
called or attempted to call. Scroll to the desired number
or name, and press the Call key.
To call a phone number using speed dialing when you
have assigned the number to one of the keys
do as follows: Press the desired number key and the Call
key in standby mode, or if the
set on, press and hold the number key in standby mode
until the call is started. To assign a phone number to a
number key, press
twice to add Contacts Speed
>
Contacts directory
Speed dialling function is
Menu in standby mode, and select
dials. To set the Speed dialling
Contacts
to ,
function