Remote Configuration (Network Service) - Nokia 9300i User Manual

Remote configuration
(network service)
The Device manager application helps you configure
connection settings, for example, e-mail, multimedia
messaging, or Internet settings.
Go to Desk Tools Device
> >
The remote configuration connection is usually started by
the server when device settings need to be updated.
To start a configuration session, select a profile from the
list, and press Connect. If no remote configuration profiles
have been defined, you must first create a new profile.
To disable configuration, select a profile, press Menu, and
select Tools Disable configuration. You cannot receive
>
configuration settings from any of the configuration
servers for which you have a profile.
When the configuration session has ended, you can view
status information.
To open the configuration log, select a profile, and
press Configuration log. The log file shows the latest
configuration status of the selected profile.
Creating a new configuration
server profile
The configuration server profile contains the settings for
the remote server. You can create several profiles if you
need to access multiple servers.
You may receive the configuration server profile settings
as a special message from your service provider.
manager.
1. If you have no profiles defined, press New, otherwise
press Menu, and select File
2. If you already have profiles defined, choose whether
you want to copy the values from an existing profile
to be used as the basis for the new profile.
3. The Profile settings dialog opens.
Define the following settings on the different pages
of the dialog:
• Server name — Type a name for the configuration
server.
• Server ID — Type the unique ID to identify the
configuration server. Contact your service provider
or system administrator for the correct value.
• Password — Write a password to identify your
device to the server. Confirm the password.
• Active — Select Yes to allow the server to initiate a
configuration session.
• Accepted — Select Yes
to ask for your confirmation when it initiates a
configuration session.
• Connection type — Select how you want to
connect to the server.
• Access point — Select the access point you want to
use for the data connection to the server.
• Host address — Type the URL address of the server.
Contact your service provider or system
administrator for the correct value.
• Port — Type the port number of the server. Contact
your service provider or system administrator for
the correct value.
• User name — Enter your user ID for the
configuration server. Contact your service provider
or system administrator for your correct user ID.
> New.
if you do not want the server
111