Lifescan OneTouch Ultra Owner's Booklet page 25

STEP 1
Insert a Lancet.
Turn the cap counterclockwise to remove it.
Insert the lancet into the lancet holder
and push down firmly until it is fully seated.
Do not twist the lancet. Twist the protective
disk until it separates from the lancet.
Replace the OneTouch ® UltraSoft Cap.
TM
Turn it clockwise until it is snug.
Adjust the puncture depth setting if necessary.
Twist the depth adjustment knob toward the
smaller bumps for a shallower puncture
or toward the larger bumps for a deeper
puncture.
20