Replacement Bulbs; Electrical System; Overload - Cadillac 2011 SRX Owner's Manual

Ofrecido por www.electromanuales.com
7. Turn the lamp assembly into the
liftgate engaging the clip side
first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.

Replacement Bulbs

Exterior Lamp
Number
Daytime
Running Lamp
Fog Lamp
Headlamp
High-Beam
Headlamp
Low-Beam
License Plate Lamp
Turn Signal Front
Tail/Turn
Signal Rear
For replacement bulbs not listed
here, contact your dealer.

Electrical System

Electrical System

Overload

The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
Bulb
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
7443
normal or the problem is fixed.
This greatly reduces the chance
H10
of circuit overload and fire caused
by electrical problems.
9005
H10
194LL
7440
7440
Vehicle Care
Fuses and circuit breakers protect
the following in the vehicle:
Headlamp Wiring
Windshield Wiper Motor
Power Windows and Other
Power Accessories
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road
and a fuse needs to be replaced,
the same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.
Headlamp Wiring
An electrical overload may cause
the lamps to go on and off, or in
some cases to remain off. Have
the headlamp wiring checked right
away if the lamps go on and off or
remain off.
10-47