Cadillac 2011 SRX Owner's Manual page 68

3-6 Seats and Restraints
Recalling RKE Memory Positions
(Memory Remote Recall)
The Memory Remote Recall feature
can recall the driver seat, outside
mirrors, and adjustable pedals,
if available, to previously stored
RKE Memory positions when
entering the vehicle.
Every time the ignition is placed
in OFF, the positions of the
driver seat, outside mirrors, and
adjustable pedals, if available, are
automatically stored to the RKE
transmitter that was used to start
the vehicle. These positions are
called RKE Memory positions and
may be different than the previously
mentioned Button Memory positions
saved to the 1 or 2 buttons.
Ofrecido por www.electromanuales.com
To automatically recall RKE Memory
positions, unlock the driver door
with the RKE transmitter, and open
the driver door. On vehicles with
Keyless Access, opening the driver
door when an RKE transmitter
is present will activate the RKE
Memory recall. If the driver door
is already open, pressing the
RKE transmitter
activate the RKE Memory recall.
The driver seat, outside mirrors,
and pedals, if available, will move
to the previously saved RKE
Memory positions.
This feature is turned on or off using
the vehicle personalization menu.
See Memory Remote Recall
under Vehicle Personalization on
page 5 42 for more information.
To stop recall movement, press
one of the memory, power mirror,
or power seat controls, or the
adjustable pedal switch, if available.
If something has blocked the
driver seat and/or the adjustable
pedals, if available, while recalling
a memory position, the recall may
stop. Remove the obstruction; then
button will also
press and hold the appropriate
manual control for the memory item
that is not recalling for two seconds.
Try recalling the memory position
again by opening the driver door
and pressing the RKE transmitter
button. If the memory position is still
not recalling, see your dealer for
service.