License Plate Lamp - Cadillac 2011 SRX Owner's Manual

10-46 Vehicle Care
8. Press a new bulb/socket into the
taillamp assembly and turn the
bulb/socket clockwise until it
clicks.
9. Reinstall the taillamp assembly
and tighten the screws.
10. Reinstall the taillamp cover by
snapping it into place.
11. Push the push pin to secure
the taillamp cover.
Ofrecido por www.electromanuales.com

License Plate Lamp

To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2 14 for more
information.
Passenger side shown,
driver side similar
2. Push the left end of the lamp
assembly towards the right.
3. Turn the lamp assembly down to
remove from liftgate.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A)
counterclockwise to remove
from lamp assembly (C).
5. Pull the bulb (B) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise
to install into lamp assembly.