License Plate Lamp; Replacement Bulbs; Electrical System - Cadillac Escalade ESV 2014 Owner's Manual

License Plate Lamp

1. Remove the two screws holding
each of the license plate lamps
to the molding that is part of the
liftgate.
2. Twist and pull the license plate
lamp assembly forward through
the molding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise.
4. Pull the bulb straight out of the
socket and install the new bulb.
5. Reverse Steps 1 3 to reinstall
the license plate lamp.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
License
Plate Lamp
For replacement bulbs not listed
here, contact your dealer.
Vehicle Care

Electrical System

Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
Bulb
and closes, protecting the circuit
Number
until the current load returns to
7441 normal or the problem is fixed. This
greatly reduces the chance of circuit
W5W LL
overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
power devices in the vehicle.
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.
10-31