Storing The Tire Sealant And Compressor Kit; Tire Changing - Cadillac 2011 SRX Owner's Manual

Ofrecido por www.electromanuales.com
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
Storing the Tire Sealant
and Compressor Kit
This vehicle may have a tire
sealant and compressor kit in
place of a jack or spare tire. It is
located in a foam container in the
rear compartment storage area.
If the vehicle has a cargo cover,
see Cargo Management System on
page 4 4 for instructions on how
to access the tire sealant and
compressor kit.
Vehicle Care

Tire Changing

Removing the Spare Tire and
Tools
To access the spare tire and tools:
1. Open the liftgate. See Liftgate
on page 2 14.
2. Press on the bottom of the
handle assembly to unlatch it
and lift up on the handle.
The prop rod locks into place
when open.
10-89