Updating Device Drivers - Gateway e-4000 User Manual

Updating device drivers

The Restoration CDs contain a device driver update utility that works over the
Internet. If you do not have an Internet service provider, the update utility
works by direct-dialing the device driver update service.
To update device drivers:
1
Insert the red Drivers CD into the CD, DVD, or recordable drive. If the
program starts automatically, go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click
Start
3
In the
Open
the CD, DVD, or recordable drive).
4
Click .
OK
5
If this is the first time you have inserted the red Drivers CD, accept the
End User License Agreement (EULA) by clicking
. The Gateway Driver and Application Recovery program starts and
Continue
the
Drivers and Application Recovery
6
Click the
7
Click
Check Now
8
Follow the on-screen instructions. Depending on the device driver you are
updating, you may only need to restart your computer to complete the
installation. However, if a setup wizard opens when you restart your
computer, follow the on-screen instructions.
Help and
Support
, then click . The Run dialog box opens.
Run
text box, type d:\runmenu.exe (where d is the drive letter of
tab.
Web Updates
. The Connect window opens.
For more information about updating device drivers in
Windows XP, click Start, then click Help and Support.
Type the keyword updating drivers in the HelpSpot
Search box
www.gateway.com
Yes, I accept it
tab appears.
, then click the arrow.
Updating device drivers
, then clicking
97