Intel i945G2-IQNAR User Manual page 59

6. After all the setting is finished. Select <Save & Exit> to save all the changes, then reboot
the system to enter Raid BIOS to setup Raid Configuration.
RAID BIOS Setup
1. Power on the computer and the system will start POST (Power On Self Test) process.
When the message below appears on the screen, press <DEL> key to enter Raid BIOS
Setup Main Menu. The Main Menu will appear the current SATA HDD and current
status.
Figure 2.11: RAID BIOS Main Menu Screen
i945G2-IQNAR User's Manual 59
User's Manual