Svr-1630 Configuration; Network Configuration - Samsung SVR-1630 User Manual

Technical Note TN-0018

SVR-1630 Configuration

3.2.1. Network Configuration

1) Press 'Menu' button.
2) Go to [System] – [Network] - [Network] menu.
3) Set 'Type' as 'Ethernet'.
4) Leave 'DHCP' as 'Off'.
5) Set 'IP address' with a certain IP address which belongs to the DSL router's sub-network range. Please refer to
the below examples. This example is assuming that the Netmask is '255.255.255.0'
DSL Router IP address
192.168.0.1 (or 192.168.0.254)
192.168.1.1 (or 192.168.1.254)
192.168.2.1 (or 192.168.2.254)
If the router limits IP addresses for the clients, SVR-1630 should be assigned an IP address of the
range.
6) Supposing DSL router has 'Netmask' as 255.255.255.0, enter 'Netmask' as 255.255.255.0
7) Enter 'Gateway' with the same value as the DSL router's IP address. (See for the Gateway address of each
manufacturer. However this may differ among models of the manufacturer. Most cases, it is 192.168.xxx.1)
D-Link, Linksys, Netgear
192.168.0.1
8) Set 'DNS1', 'DNS2', and 'DNS3' properly. If you do not have the value, contact your ISP (from where you
purchased the Internet line) and ask for values. (At the very least DNS1 should be set.)
Samsung Techwin Co., Ltd.
Available IP on LAN
192.168.0.2 ~ 192.168.0.253
192.168.1.2 ~ 192.168.1.253
192.168.2.2 ~ 192.168.2.253
3Com Netopia
192.168.1.1 192.168.1.254
SVR-1630
Recommended IP for SVR-1630
192.168.0.253
192.168.1.253
192.168.2.253
Belkin, SMC
192.168.2.1
16