Technical Note TN-0018
4.2. IP sharing among multiple units of SVR-1630
Set SVR-1630 and DSL router in the same manner for setting the network of an SVR-1630 except for 'Port setting' on
SVR-1630. In addition to this, add more ports to the DSL router for 'Port Forwarding' as below.
Assign the local IP addresses for the 1
st
-
E.g. 1
SVR-1630 local IP address: 192.168.0.253
nd
-
E.g. 2
SVR-1630 local IP address: 192.168.0.252
nd
Change the 2
SVR-1630's ports different FROM the 1
st
-
E.g. 1
SVR-1630's Monitor Port: 8001
nd
-
E.g. 2
SVR-1630's Monitor Port: 8002
Add the ports on DSL router for 'Port Forwarding'.
-
E.g. Add the port '8001' for IP address '192.168.0.253'
-
E.g. Add the port '8002' for IP address '192.168.0.252'
Then DSL router may route incoming traffic properly according to the used port number.
SVR Manager
Monitor Program
Samsung Techwin Co., Ltd.
st
nd
SVR-1630 and the 2
SVR-1630
st
SVR-1630
SVR-1630
27