Troubleshooting - iRobot Roomba 500 Series Owner's Manual

Troubleshooting

Roomba will tell you something is wrong with a two-tone "uh-oh" sound. A narrated
voice will tell you there is an issue when you try to start a cleaning cycle.
Refer to the chart below to resolve Roomba's problem.
If the problem is not resolved, visit www.irobot.com/support.
Roomba says
Remove and clean
Roomba's front wheel
Inspect and clean Roomba's
cliff sensors
Inspect and clean Roomba's
drive wheel(s)
Please remove and clean
Roomba's brushes
Please clean Roomba's side
brush
Charging Errors 1-10
Error 1-10
22
iRobot Roomba 500 Series
Likely cause What to do
The front wheel Roomba is stuck or something is
is stuck wrapped around the front wheel.
Remove and clean hair and debris from
Roomba's front wheel.
Roomba's cliff Wipe off Roomba's cliff sensors with a
sensors are dirty dry cloth.
A drive wheel is Roomba is stuck or something is
stuck wrapped around a drive wheel. Clean
Roomba's wheels, push them in and out
and confirm that they turn freely.
The main brushes Turn over Roomba. Remove and clean
cannot turn Roomba's brushes. (see pg. 20)
The side brush Turn Roomba over and clean the side
cannot turn brush. Remove the sidebrush with a
screwdriver to thoroughly clean it.
Roomba has a Contact iRobot Customer Support.
charging error
Roomba has an Contact iRobot Customer Support.
unspecified error